User guide

Parking the Paper
Paper parking is the function which moves the paper out of the printing sector (the area between
the print head and the platen). When you decide to remove the paper from the printer, the paper
must be parked first.
Note:
Parking the paper allows you to use the other paper paths.
Proceed as follows:
1. Press the
Set-Up
button.
2. Press the
Park
button.
The paper is moved backwards out of the printing sector.
Note:
When using the Pull paper path, the function of the
Park
button is different. As no
reverse movement is allowed with that path, the parking function is replaced by a form
feed. The display shows then Remove paper.
If you select the No tear/reverse Value for the TEAR/VIEW MODE Option, the
parking function is inhibited.
Unsuccessful Paper Parking
If the paper is not totally parked (paper still inserted in the printer), the printer enters the Fault
state and the display shows:
1. Tear-off paper
2. Press Park
1. Tear-off the paper.
2. Press the
Park
button again.
Resetting Paper Position
Resetting the paper position is useful, if you have moved the paper with the platen knob, or if for
any other reason you do not know exactly where the paper is positioned.
To reset the paper position in the current paper path:
1. Press the
Set-Up
button, followed by the
Park
button.
The printer parks the paper.
2. Press the
FF/Load
button.
The paper is positioned with the first printable line facing the print head.
Handling Different Types of Paper
3-32