User guide

7. Lock the left tractor on the tractor bar by pushing down its locking lever. If necessary, adjust
the right tractor position so that the paper is moderately taut and appears to lay flat on the
paper supports. Lock the right tractor.
Caution:
Do not stretch the paper too tightly. The side perforation may tear or the pinfeed
holes may enlarge and cause misfeed. Make sure that the paper is taut by moving the
right tractor to the right.
8. Power the printer on.
9. Press the
Path
button until the Push-Rear path is selected.
d4003a30
Checking that the Paper is Taut
Handling Different Types of Paper
3-28