User guide

10. Close the front cover
⑩
by pushing down on both corners. The front cover is properly closed
when it clicks into place and its edges are aligned with the printer casing.
11. Power the printer on.
12. If necessary, select the Push-Front path at the operator panel.
13. Press the
FF/Load
button.
The message "Loading paper..." appears on the display and the paper is loaded into
the printer. When the paper stops, the Push-Front indicator is on, the
Fault
indicator is off and
the display shows "Ready M1-Aut.". You are now ready to print.
d4001c17
Closing the Front Cover
d400-a99
Paper Loaded in the Push-Front Paper Path
Handling Different Types of Paper
3-18