User guide

Handling Continuous Forms using the Push Tractorin Front Position
Mounting the Push Tractor Unit in Front Position
Warning:
Before mounting or removing any paper feeding device, power-off the printer.
1. Remove the Push tractor unit
①
from its plastic packet.
2. Remove the black plastic protection
②
from the electrical connector
③
.
3. Disengage the plastic protection
④
from the feeding motor gear wheel, rotating it.
d4001a02
Removing the Protection from the Electrical Connector
d4001a04
Disengaging the Gear Wheel Protection
Handling Different Types of Paper
3-10