User guide

The Function of the Buttons in Normal Mode
As explained previously, the function of the button mainly depends on the operating mode but is
also affected by the printer state. Normal mode gives you direct access to the following button
functions:
Button Functions Purpose
Ready/Pause State Busy State Fault State
Paper Out Other Fault
Path
To select one of the
available paper paths.
See "How to Select a Paper
Path" in Chapter 3.
Inactive Same as for
Ready/Pause
state.
Inactive
Quiet
To toggle between the Quiet
and the Normal modes.
See "Reducing the Print
Noise Level" in Chapter 4.
Same as for
Ready/Pause
state.
Same as for
Ready/Pause
state.
Inactive
Macro
To select one of the Macros
(access to the
M1
,
M2
,
M3
and
M4
button functions).
See "Using Macros" in
Chapter 4.
Inactive Same as for
Ready/Pause
state.
Inactive
LF
LF
- To advance the paper
one line at the current
vertical pitch.
See "Moving the Paper" in
Chapter 3.
Inactive Same as for
Ready/Pause
state.
Inactive
M1
M1
- To select Macro 1.
See "Using Macros" in
Chapter 4.
FF/Load
FF/Load
- To advance the
paper. The paper moves
according to the settings of
the Tear/View mode.
See "Moving the Paper" in
Chapter 3.
Inactive Same as for
Ready/Pause
state.
Inactive
M2
M2
- To select Macro 2.
See "Using Macros" in
Chapter 4.
Getting to Know Your Printer
2-14