User guide

Reports (cont.)
Mnemonic Function Command Remarks
DECLANS Load
ANSWERBACK
without Password
DCS Ps1 v
encoded_mess_string
ST
Message is Hex. encoded.
DECLANS Load
ANSWERBACK with
Password
DCS Ps1;Pn2;Pn3v
encoded_mess_string
ST
Ps = 1 : No password - Do not store
message.
Ps = 2: No password - Store message:
Ps = 3: Password - Store
Pn2: Old password
Pn3: New password
Default password: 0
Password range: 0 - 9999
ENQ Send
ANSWERBACK
Message
0/5
C0 Control Code
DECRFS Request Font Status
CSI Ps " {
Ps must be 3
DSR Device Status Request
CSI Ps n
Ps = 0 or 5: Request extended DSR
Ps = ?1: Disable unsolicited reposts
Ps = ?2: Enable brief unsolicited reports,
send extended report
Ps = ?3: Enable/send extended unsolicited
reports
DSR Device Status Report
Brief: CSI Ps n
Extended: brief,
followed by
CSI ? Pn1 ; Pn2 ; ...
; Pnn n
Ps = 0: No errors
Ps = 3: Error
See the Programming Supplement for
extended report.
Miscellaneous
Mnemonic Function Command Remarks
BEL Bell
0/7
C0 Control Code
DECSCL Select Conformance
Level
CSI Ps1 " p
Ps = 0: reset native level
Ps = 71: reset - DEC PPL1
Ps = 72: reset - DEC PPL2
DECSTR Soft Terminal Reset
CSI ! p
Reset to initial state
RIS Reset to initial state
ESC c
Reset to initial state
DECIPEM IBM Proprinter
Protocol Mode
CSI ? 58 h
CSI ? 58 l
Deprecated function
DEC PPL2 Quick Reference
D-10