User guide

9. Check that the paper is fairly taut and lock the left and right tractors
⑦
in place by pulling the
tractor locking buttons
⑥
towards the front of the printer.
10. – If you press
Pause, the current path will be the last selected path (Pull or Push+Pull). The
Factory setting is Pull.
The printer is now ready to print.
– If you press
Path, you can force the path selection according to your needs (Pull or
Push+Pull). Then press
Pause. The printer is ready to print.
Note:
When using the Pull path, remove the paper from the Push tractor unit, once loaded onto
the Pull tractor.
d4005c29
Locking the Tractors in Place
carta 8
Pull Path
carta 12
Push+Pull Path
Supplies and Options
A-11