User guide

8. Hook the left cut-out Pull tractor pins cover
⑦
with the cut-out towards the center of the
printer on the two lateral plastic pins and gently push it down until it clicks in place.Repeat
the same operation for the right cut-out Pull tractor pins cover
⑧
.
9. Remove the black plastic protection
⑨
from the electrical connector
⑩
.
d4001a46
Removing the Black Plastic Protection
Inserting the Left Cut-out Pull Tractor Pins Cover
d400a41
d400a42
Inserting the Right Cut-out Pull Tractor Pins Cover
Supplies and Options
A-6