User guide

Example Configuring
The following is an example Configuration procedure, in which we will alter the Factory settings:
the font is changed from Draft to Orator and the horizontal pitch is changed from 10 cpi to
17.1 cpi in DEC protocol for Macro 2.
1. Press the
Set-Up
button to put the printer in Set-Up mode.
MACROS is displayed.
2. Press the button.
The display shows MACRO 1.
3. Press the button.
The display shows MACRO 2.
4. Press the button.
The display shows PROTOCOL.
5. Press the button until FONT is displayed.
6. Press the button.
The display shows * Draft.
7. Press the or button, until the display shows Orator.
8. Press the
Sel/Save
button to select this font.
An asterisk is displayed to indicate that the Value has been selected.
9. Press the button to return to the Options level.
The display shows FONT.
10. Press the or button, until the display shows DEC MODE.
11. Press the button to pass over to the value setting for the DEC defaults, the display shows
HORIZONTAL PITCH.
12. Press the button.
The display shows 10 cpi.
13. Press the or button, until the display shows 17.1 cpi.
14. Press the
Sel/Save
button to select the horizontal pitch.
An asterisk is displayed to indicate that the value has been selected.
Configuring Your Printer
6-13