User manual

IEIMobile Solution
www.ieimobile.com
Daily Patient Record Case Study
A major Taiwan-based hospital with the second largest patient ow in the country has been changing its paper-based recording system into
electronic recording systems. With 1,096 beds, approximately 4,000 outpatient visits per day and a bed occupancy rate of 85%, emergency
response and after patient care are the most important services provided by this hospital.
Previously, nurses relied on desktop computers and paper records to monitor patients' daily health information
such as food intake, body temperature, and output. Daily records were recorded on a notebook located at
each patients’ bedside. Nurses found this paper-based method to be inconvenient as the records were easily
misplaced or lost. Furthermore, hand written information were often misunderstood or hard to read.
The hospital realized it was time to improve its daily patient recording system with an electronic-based system.
The institution was in search for a mobile computing solution to enhance nursing efciency and accuracy.
The ICEFIRE 10.4” Mobile Clinic Assistant offers a mobile
platform in which nurses can input and store patient
information instantly. The built-in hand writing recognition
function and the digitizer technology allow nurses to easily
write on the tablet surface without mis-touch. In addition,
the barcode and RFID readers are very helpful when it
comes to identifying patient and medication. The tablet
PC can be connected to the hospital’s medical database
through Wi-Fi, and patient records can be updated or
retrieved safely and efciently.
● 10.4” screen for easy viewing and operation.
● Dual-mode input with digitizer technology and resistive touch for hand writing recognition and mis-touch prevention.
● Built-in 1D/2D barcode and 13.56MHz RFID reader for automatic identication.
● Dual hot swap battery for increased device operation time.
● Ergonomic design for easy carry and easy use.
Background
Mounting with Docking Station
Challenge
Solution
Benefits
ICEFIRE-2013-V10
Flexible Installation Design
Secure the holder onto the
top of the docking station
by inserting four retention
screws
100mm x 100mm
VESA Mount
Release the Stand
Secure the Holder
Lock the Stand
The optional docking station of the ICEFIRE2-T10 can be installed on any VESA
compliant mounting device. The VESA mount retention screw holes of the docking
station are shown in 483H746HFigure 3-13. Follow the instructions in the user
manual of the mounting device to mount the docking station securely.
VESA Mounting Retention
Screw Holes
(Docking Station)
Move the stand downward. Slide the two latches again to lock the stand into place