User guide

Battery Subsystem Parameters, Continued
Table 5–2 (Continued) BSS Parameter Definitions
Parameter Definition
BSS_REPL Number of days of battery life left for current
battery when the NVRAM was last updated.
This value does not represent the run-time
value. To update the NVRAM, and thus cause
this parameter to reflect the current run-time
value, see the BSS_UPNV parameter.
BSS_CHRG Number of minutes of charge when the NVRAM
as last updated. This value does not represent
the run-time value. To update the NVRAM, and
thus cause this parameter to reflect the current
run-time value, see the BSS_UPNV parameter.
BSS_TINT The interval between runs of the periodic
battery test in minutes.
BSS_TLEN The length of the periodic battery test in
minutes.
Continued on next page
5–8