User guide

PARAMS, Continued
HELP
Example
PARAMS> help
ENABLE MSCP
EXIT
HELP
LOCATE
SET {parameter | .} value
SHOW {parameter | . | /class}
/ALL /CONST
/DUP /SCS
/MSCP /BSS
STATUS [type]
CONFIG LOGS DUMP
THREADS MEMORY
MSCP PATHS DATALINK
HOURLY VCLOGS BB
WRITE
ZERO counter
ALL HOURLY
MSCP
PARAMS>
LOCATE
The LOCATE command causes a soft fault in the ISE (it has no
effect on its current operation or state) to help find it. The fault
indicator on the drive module (red LED), the OCP (red LED), or
on the canister (magnetic disk with small green stripe) turn on
and stay on until you press
Return
at the PARAMS> prompt.
LOCATE
Syntax
LOCATE parameter-name value
Continued on next page
4–31