User guide

PARAMS, Continued
PARAMS
Commands
Available PARAMS commands are:
Name Function
ENABLE
MSCP
Enables MSCP server
EXIT Terminates PARAMS
HELP Prints a brief list of commands and their syntax
LOCATE Causes a soft fault in the ISE to help locate it
SET Sets a parameter to a value
SHOW Displays a parameter or a class of parameters
STATUS Displays information about the drive’s history
WRITE Updates the NVR from the cached copy
ZERO Clears a block of counters or all known blocks of
counters
The following sections describe these commands.
ENABLE
MSCP
The ENABLE MSCP command, used with certain types of
hosts/configurations, enable the MSCP server.
Continued on next page
4–29