User guide

MEMTST, Continued
Example
The following is an example of a successful run of the MEMTST
utility. In this case, each memory module was tested twice and
passed.
DUP Array Bad Block Test
Copyright © 1990, 1991, 1992 Digital Equipment Corporation
User data will be corrupted. Proceed? [1=Yes/(0=No)] 1
Test time in minutes? [0 (= 1 pass) <-> 200] 16
Testing slot 0:
Array OK - has 2 bad blocks
Testing slot 1:
Array OK - has 0 bad blocks
Testing slot 2:
No array installed
Testing slot 3:
No array installed
Testing slot 4:
No array installed
Testing slot 0:
Array OK - has 2 bad blocks
Testing slot 1:
Array OK - has 0 bad blocks
Testing slot 2:
No array installed
Testing slot 3:
No array installed
Testing slot 4:
No array installed
Testing slot 0:
Test completed.
Continued on next page
4–25