User guide

BATTST, Continued

Example

The following is an example of the BATTST utility:

Test requires the unit power to be removed.

Proceed? [1=Yes/(0=No)] 1

Remove external power, Variable BAT_TEST will contain the time

Test passed.

After removing the power and allowing the batteries to drain,

the following example shows how to get the test results. In this

case, the batteries lasted for 40 minutes and 12 seconds.

PARAMS>SHOW BAT_TEST

Parameter Current Default Type Radix

--------- -------- -------- ----- ------

BAT_TEST 00:40:12 00:00:00 String Ascii

PARAMS>EXIT

Exiting...

4–22