User guide

BATTST, Continued
Dialogue
The following table explains the BATTST dialogue.
Message Explanation
Copyright © 1990,1991,1992 Digital
Equipment Corporation
No response is expected.
Test requires the unit power to be
removed. Proceed? [1=Yes/(0=No)]
Do you want to remove power from
the EF5XX? This may affect other
drives in the cabinet or may require a
system shutdown.
Remove external power, Variable
BAT_TEST will contain the time
Remove power from the EF5XX under
test. Depending on the configuration,
this may require a system shutdown.
After the test is completed, the
results are available in the parameter
BAT_TEST.
Test passed. This message indicates that the
BATTST operation has started. The
program stops automatically when the
batteries are exhausted.
Continued on next page
4–21