User guide

DRVTST, Continued
Error
Messages
The following table describes DRVTST error messages.
Message Description
Unit is currently in use. This can mean that the ISE unit is
inoperative, in use by a host, or is currently
running another local program.
Operation aborted by user. This message appears if the user stops the
program while it is in progress.
xxxx - Unit diagnostics failed. This is a fatal error message where xxxx is
the MSCP error code. Call Digital Services.
xxxx - Unit read/write test
failed.
This is also a fatal error message where
xxxx is the MSCP error code. Call Digital
Services.
Continued on next page
4–15