User guide

DRVTST
DRVTST
Program
Description
The DRVTST program provides a comprehensive test of the ISE
hardware. Errors detected by this program can be isolated to
the FRU level.
Dialogue
The following table describes the DRVTST dialogue:
Message Explanation
Copyright © 1989 Digital Equipment
Corporation
No response is expected.
Write/read anywhere on the medium?
[1=Yes/(0=No)]
Do you want to write to the user data
area? If you type 0, this is a read-only
test. DRVTST does, however, write to
a diagnostic area on the disk.
User data will be corrupted. Proceed?
[1=Yes/(0=No)]
Do you really want to overwrite
existing data on the user data area?
If you type 0, this is a read-only test.
5 minutes to complete. No response is expected.
Test passed. The test was successful. Choose
another local program or return
control to the system.
Continued on next page
4–14