User guide

How to Access Local Programs, Continued
Using MDM
If neither VMS nor console commands are available on your
system, you can run local programs using MDM. Use the
following procedure:
1. Boot MDM.
2. Enter the date and time.
3. Select the menus in the following order:
Service menu
Device menu
KFQSAA-KFQSA subsystem menu
Device Utilities menu
Device Resident Programs menu
When you select the Device Resident Programs menu, the
following displays:
RUNNING A UTILITY SERVICE TEST
To stop the test at any time and return to the previous
menu, press
CTRL/C
.
Continued on next page
4–7