User guide

How to Access Local Programs, Continued
Q–bus
Adapters
(continued)
To access a local program from a system with an embedded
adapter, use the command:
>>> SET HOST/DUP/DSSI/BUS:n #
n = bus number where the ISE is located
# = DSSI node number of the ISE
The system then prompts you for the name of the local program
you want to run.
To find the DSSI node number and node name, type SHOW
DSSI at the >>> prompt. To see a list of the devices on
the Q–bus, type SHOW QBUS or SHOW UQSSP at the >>>
prompt.
To abort the program and return control to the system, press
Ctrl/C
or
Ctrl/Y
.
Continued on next page
4–6