User guide

SF7X Controls and Indicators, Continued
Control and
Indicator
Functions
The following table describes the functions of the controls and
indicators on the front of the SF7X enclosure.
Control/
Indicator Color Function
Ready Green Illuminates when ISE is on
line and read/write ready.
Fault Red Illuminates when fault is
detected.
DSSI Node ID Green Displays ISE DSSI Node ID.
Write Protect Yellow Commands write protect
mode. Shows write protect
enabled.
Terminator Power Green On while when Terminator
Power is being supplied.
Split Bus Green On when enclosure is in
Split Bus mode.
DSSI Node ID Select N/A 3 bits, selects DSSI node ID
number.
MSCP Enable/Disable N/A 1 bit, enables or disables the
ISE MSCP server.
DC power switches (4) Green Applies DC power to ISE.
Shows power status.
3–7