User guide

BA400-Series Controls and Indicators, Continued

Control and

Indicator

Functions

The following table describes the functions of the controls and

indicators on the BA400-series DSSI operator control panel:

Control Status Function

Fault LED Lit Indicates an error condition within the ISE.

Not lit Indicates an error-free condition within the

ISE.

Quick ﬂash

(10 Hz)

OCP failure, or drive select plug is missing.

Run/Ready

Button

In (lit) The ISE is on line. When the ISE is available

for use, the green LED is lit. When the ISE is

being used, the green LED ﬂickers.

Out (not lit) The ISE is off line and cannot be accessed. The

green LED cannot be lit when the Run/Ready

button is out.

Slow ﬂash (1

Hz)

Data retention system is initializing, saving, or

restoring data.

Write-

Protect

Button

In (lit) The ISE is write-protected. System software

cannot write to the ISE.

Out (not lit) The ISE is not write-protected. This is the

normal position for software operation. System

software is free to read or write to the ISE.

3–4