User`s guide

Function Blocks
Function Block Categories and Types
Release E UMC800 Control Builder User’s Guide 63
1/01
Block Type Description Graphic Form
SPSA Setpoint Scheduler Auxiliary Setpoint - The eight setpoint
outputs of the Auxiliary Setpoint block are set to the current
step value. The current step is an input to the block and must
be connected to the step output of a Master Scheduler block
(SPS).
SPEV
Setpoint Scheduler Events Decoder - Sets up to 16 digital
status outputs that may be ON or OFF on a per segment
basis. Inputs include Program Number, Segment Number,
and Program State (Ready, Run, Ghold, and Stop) from a
Setpoint Scheduler block.