User`s guide

Function Blocks
Function Block Categories and Types
60 UMC800 Control Builder User’s Guide Release E
1/01
Setpoint program category
Table 16 lists the function block types in the Setpoint Program category.
Table 16 Setpoint program category function block types
Block Type Description Graphic Form
SPP Setpoint Programmer - Each of the four possible SPP
blocks can run one profile selected from a pool of 70.
Its primary output (SP) is used as a remote setpoint input
(RSP) for one or more PID function blocks. Provides various
secondary inputs and outputs for selected interaction with
other control blocks.
RCP Recipe Selector - Loads numbered recipe (NUM) into the
various blocks of the controller when digital signal (LD) is ON.
SPEV
Setpoint Program/Scheduler Events Decoder - Sets up to
16 digital status outputs that may be ON or OFF on a per
segment basis. Inputs include Program Number, Segment
Number, and Program State (Ready, Run, Ghold, and Stop)
from a setpoint program/scheduler block.