User`s guide

Control Builder Overview
Configuration Functions
44 UMC800 Control Builder User’s Guide Release E
1/01
Operator interface displays
Operator Interface Display configuration lets you define the parameters to be monitored at the Operator
Interface through a predetermined set of standard displays. Customized display access and the assignment
of selected display groups to keyboard buttons may also be developed through the Control Builder.
Selected groups such as bar graphs, trends, overview, loop groups will require the user to specify the
individual block, signal or variable tags to be represented on the displays.
Any displayed item must exist as a valid tagged item on the function block diagram.
The Operator Interface displays include:
Display Tag Groups
Alarms
Trends
Panel Meters
Bars
Overviews
Single Pt. Panels
Multi-Point Panels
Tag Order
Loops
SP Programmers
HOA Switches
Device Control
Start up Display
Message Displays
Setpoint Scheduler Displays
Note: You can configure pushbutton and 4 selector switch displays (actions applied to F1 through
F4 keys) via the function block dialog boxes.
O/I Display Buttons (1-8)
O/I Settings
O/I File Names
Figure 9 is an example of a typical Display Tag Group Configuration dialog box with the Overview tab
selected for the Operator Interface.
Refer to How to Configure Display Tag Groups (page 100) for details.
Figure 9 Configuration form for the operator interface overview display