User`s guide

iv UMC800 Control Builder User’s Guide Release E
1/01
About This Document
Abstract
The "Control Builder" configuration software program is used for UMC800 Controller and Operator Interface
configuration and operates on a Windows '95™- or Windows NT-based PC. The software program uses graphic
symbols and line drawing connections to create custom control strategies. Menus are provided in the software to
allow selection of screens for the operator interface and to customize screen access methods and operator keys.
Completed configurations are loaded into the control system using a dedicated communication port in the controller.
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Document Title Doc ID
UMC800 Controller Technical Overview 51-52-03-24
UMC800 Controller Installation and User Guide 51-52-25-61
UMC800 Operator Interface User Guide 51-52-25-62
UMC800 Control Builder Function Block Reference Guide 51-52-25-64
UMC800 RS232 Communications Manual 51-52-25-76
UMC800 Modbus® Communications Manuals 51-52-25-87
Contacts
World Wide Web
The following lists Honeywell’s World Wide Web sites that will be of interest to our customers.
Honeywell Organization WWW Address (URL)
Corporate
http://www.honeywell.com
Sensing and Control
http://www.honeywell.com/sensing
International
http://www.honeywell.com/Business/global.asp