User`s guide

Control Builder Main Window Menu System
Main Window Menus
22 UMC800 Control Builder User’s Guide Release E
1/01
Configure menu
Table 6 lists all the CONFIGURE menu selections and their functions.
Table 6 Configure menu selections
Menu Selection Functionality (The menu selection…)
Execution Order ... Displays the “Function Block Execution Order” dialog box. Allows modification of the
execution order of the function blocks.
Fast Logic
Execution Order ...
Displays the “Function Block Execution Order” dialog box. Allows modification of the
execution order of the Fast Logic function blocks.
Setpoint Profiles ...
Displays the “Setpoint Profile Pool” dialog box.
Allows you to add, delete, and edit programs and set their properties.
Recipes ... Displays the “Recipe Pool” dialog box.
Allows you to add, delete, and edit recipes and set their properties.
Setpoint Schedules
Displays the “Setpoint Schedule Pool” dialog box.
Allows you to add, delete, and edit Setpoint Schedules and set their properties.
Data Storage ...
Displays the Data Storage Configuration Tabs to allow storage of Trends, Unit Data
Samples (Point Log), and Alarm/Events.
Data Storage Configuration Tabs
Trend
Contains the “Trend” data storage configuration fields. Two trend
files of up to 12 points each are supported.
Point Log
Contains the “Point Log” data storage configuration fields.
Samples of process data for up to 12 points can be scheduled to
occur at a specified time or by a digital event in the controller.
Alarm/Event
Contains the “Alarm” data storage configuration fields. Alarm
recording stores up to 150 On and Off alarm actions at a specified
time and date.
Events ... Displays the “Configure Digital Event List” dialog box.
Allows you to configure up to 32 digital events signals in the controller.
Display Tag Groups ...
Displays the Display Tag Group Configuration Tabs to allow assignment of signal
tags to groups of displays.
Display Tag Group Tabs
Alarm tab
Contains the “Alarm Display Tag Groups Configuration” entry
fields. You can assign digital signal tags to up to 10 groups of
displays.
Panel Meter
tab
Contains the “Panel Meter Display Tag Groups Configuration”
entry fields. You can assign signal tags and variables to up to 10
groups of Panel Meter displays.
Trend tab Contains the “Trend Display Tag Groups Configuration” entry
fields. You can assign analog or digital signal tags to up to 4
groups of Trend displays.
Bar tab
Contains the “Bar Display Tag Groups Configuration” entry fields.
You can assign analog or digital signal tags to up to 4 groups of
Bar displays. It allows High and Low scaling.