User`s guide

Control Builder Main Window Menu System
Overview
16 UMC800 Control Builder User’s Guide Release E
1/01
Figure 4 is a graphic of the Control Builder Main window. Select any main menu name to access the
respective sub-menu and then select a desired menu item or command to access it.
Figure 4 Control Builder main window
Menu conventions
The following menu conventions are used:
Menu Convention Meaning
Dimmed command
You will not be able to use this command at the current time.
(For example: You may need to select another item before using this command.)
An ellipsis (...)
following a command
A dialog box will appear when you choose this command. The dialog box
contains options you need to select before the command can be completed.
A check mark next to
a command
The command is in effect. When you remove the check mark (by selecting the
command), the command is no longer in effect.
A key combination
next to a command
The key combination is a keyboard accelerator shortcut for this command. You
can use this key combination to choose this command.
A triangle ( QH[W
to a command
When you choose this command, a cascading menu appears, listing additional
commands.
Selecting a menu
In this application, you select (highlight) a menu and then choose a command from that menu. Choosing
the command carries out the action.
To choose an item from a selected menu: