User`s guide

Appendix E – Measuring pH with UMC800 Controller and Durafet II Cap Adapter
Sample Help Displays
270 UMC800 Control Builder User’s Guide Release E
1/01
STANDARDIZATION SAVE
1) ACCESS THE STANDARDIZE
PARAMETERS DISPLAY
2) NOTE THE VALUE OF EACH PARAMETER
FOR PH, MV, AND TEMP IN SEQUENCE
3) PRESS THE MENU BUTTON AND
SELECT RECIPES
4) ENTER RECIPE 1 STARTUP, EDIT
5) TRANSFER VALUES FROM STEP 2
TO THE RECIPE 1
6) PRESS ESC. TO EXIT
When operating the UMC800 controller for pH measurements, follow the help displays above to
standardize the electrode before making pH measurements.
ATTENTION
The displays and function blocks described here deal only with the pH measurements.
To configure PID control or other control parameters and displays, refer to the UMC800
function block reference guide.