User`s guide

Installation
Installation Procedure
12 UMC800 Control Builder User’s Guide Release E
1/01
Installation Procedure
Installing and setting up the UMC800 Control Builder software
You install the Control Builder program files from the CD-ROM.
Step Action
1
Insert the Control Builder CD into your CD drive.
2 Click on the “Start” button and select “RUN."
3
At the “Run” dialog box, Click on the “Browse” button and locate your CD-ROM drive. Click
“OPEN”.
4 Click on “Setup.exe and click “OPEN”. Click OK on the “RUN” dialog box.
5 At the “Welcome” dialog box,.
• Click “Next” to continue with the Setup Program or
• Click “Cancel” to quit Setup
6
At the “License Agreement” dialog box, read the agreement then click “NEXT” to continue the
Setup program.
7 At the “Choose Destination Location” dialog box, Setup will install the UMC800 Control
Builder in destination folder C:\Program Files\Control Builder 5.0, or you can install to a
folder of your choosing.
• Click “Next” if the destination directory is correct, or
• Click “Browse” to open the “Choose Folder” dialog box and choose another folder, click
OK, then click “Next".
8
At the “Select Program Folder” dialog box, you an type another folder name, or select one
from the existing list.
9
The Program files will install and Setup will be complete.
Click “Finish".