User`s guide

Configuration File Write Protection
Adding and Removing Write Protection
222 UMC800 Control Builder User’s Guide Release E
1/01
Opening a write protected file
Step Action Graphic
1
From the “File” menu, select “Open”.
2
Select the file you want to open from the list of
files in the dialog box.
3
Enter the password for that file, then press “OK”
or “Cancel Open”.
Removing write protection from a file
Step Action Result
1
From the “File” menu, select “Unprotect”.
NOTE: If the file is not “Write Protected”, this word
will be grayed out.
2
When the "Remote Write Protection" dialog box
appears, enter the password for the file in the
“Password” field, then click “OK”.
3
When the question box appears, click "Yes" to
confirm that you want to remove file password
protection. Write protection is removed from
the file. (“Unprotect” will be grayed out on the file
menu.)
If you want to Write Protect the file again, refer to Adding write protection to a file (page 221).