User`s guide

Release E UMC800 Control Builder User’s Guide 221
1/01
Configuration File Write Protection
Adding and Removing Write Protection
Introduction
The UMC800 Control Builder provides an optional configuration file Write protection. All the files default
to “No Protection”. Through the FILE menu, you can enter a password to write protect each file. You can
also remove Write protection using the same password.
Adding write protection to a file
Step Action Graphic/Result
1
From the “File” menu, select “Write Protect”.
2
When the "Configuration File Write Protection"
dialog box appears, enter a password for the
file in the “New Password” field (up to 14
characters).
3
Re-enter the password in the “Confirm New
Password” field.
4
Click “OK”. The file will be WRITE protected when saved. You may
continue to edit the document. The next time it is
opened, the password is needed to open it for editing
and saving.
To remove Write Protection, refer to Removing write protection from a file (page 222).