User`s guide

On-line Monitoring and Diagnostics
I/O Module Diagnostics
Release E UMC800 Control Builder User’s Guide 217
1/01
I/O Module Diagnostics
Introduction
The LCB provides live monitoring I/O Module diagnostics. The instrument executes diagnostic routines
during instrument start-up and during on-line operation.
Follow the procedure in Figure 68 to access the I/O Module Diagnostic Summary dialog box.
Refer to Table 53 for status indications, possible cause, and actions to correct the problem.
Select “I/O Module
Diagnostics” from the
“Communication” menu.
The summary will
provide status of the
Modules shown in
the list.
See Table 52 for
Status list.
The “I/O Module
Diagnostic
Summary” dialog
box will appear.
Figure 68 Accessing I/O module diagnostics