User`s guide

On-line Monitoring and Diagnostics
Selecting a Block for Monitoring
Release E UMC800 Control Builder User’s Guide 205
1/01
Selecting a Block for Monitoring
Introduction
The procedure for selecting a function block and monitoring it is given in Figure 61.
1. Select a block on
the function block
diagram. (Click on
it.) A dotted line will
appear around it.
OR
2a. Select “Monitor’
from the
Communications menu
2b. Right click on
the function block
and select “Monitor”.
The “Live Monitor” Dialog box will open and display the various parameters that can be monitored and/or that can be
changed for testing and debugging purposes. The example below shows a Live Monitor dialog box for a PID
Function Block.
Figure 61 Selecting a block for monitoring