User`s guide

Data Storage Configuration

Release E UMC800 Control Builder User’s Guide 197

1/01

Point log configuration details

Table 49 lists all the entry fields that appear on the “Point Log’ configuration tab with a description of the

feature when the field is selected.

Table 49 Point log configuration details

Feature Description

File Name

Enter a File Name. There is a maximum of 8 Alpha Numeric

characters. (DOS File Name restrictions)

Tag List

• From the Tag List pull-down menu, select the type of signals you

want the tag list to display.

• Click on a Tag Name and click ADD>>.

The tag name will be added to the “Selected Tags” list.

Scaling Signals

Scale each tag selected for High and Low. Click on the “Scale High”

and “Scale Low” fields and enter the value.

To delete a signal tag, click on a tag and click Delete.

Data Type Enable Signal

This enable signal turns storage on and off for Point Logs.

From the drop-down menu, select:

NONE – Point Log Storage Enable is started/stopped only through the

operator interface’s Data Storage Control Menu (defaults to Enable on

configuration download), or

ANY DIGITAL TAG – Enable is started/stopped only through the on/off

state of the selected Digital Signal. It will not appear on the operator

interface’s data Storage Control Menu

For detailed information concerning Data Storage Enable, refer to

Overview of Data Storage Enable Conditions (page 187).

Storage Mode

From the drop-down menu, select a storage mode.

Refer to Table 47 for mode definitions.