User`s guide

Controller Recipes
What is a Recipe
Release E UMC800 Control Builder User’s Guide 177
1/01
Table 45 Description of the recipe attributes shown in Figure 49
Item Description
1
Recipe Variables—A list of up to 50 Variables can be compiled for each recipe. A valid Operator
Variable and desired setting must be specified for each recipe item.
2 Recipe Name—A descriptive name must be assigned consisting of from 1 to 8 letters or numbers
with no spaces. Thus, a name can be any combination of letters and numbers without spaces. Note
that lowercase letters are automatically converted to uppercase letters.
3
Recipe Number—A unique number from 1 to 50 must be assigned for each recipe that is configured.
Numbers can be assigned in any sequence with gaps between numbers, but no two recipes can be
given the same number.
4 Recipe Variable Name—A valid variable name is any Analog or Digital Operator Point that exists in
the Function Block Diagram Configuration.
5
Adjustable Settings—The setting for an analog point can be any appropriate value from
–99999 to 99999, and a digital point can be set in its ON or OFF state. It is possible to edit/change
any recipe item/Variable Name setting through the Recipe Setup display during configuration.