User`s guide

Setpoint Scheduler
Setup/Edit Setpoint Schedule
174 UMC800 Control Builder User’s Guide Release E
1/01
Edit the Aux Out values
Introduction
The auxiliary block supports up to 8 soak only outputs. You can assign values to all eight Auxiliary
Outputs for each segment by clicking the “Edit Aux” button on the dialog box.
Follow the procedure in Table 44 to select the Auxiliary Output values.
Table 44 Auxiliary output values configuration
• To EDIT the Auxiliary Outputs for the Segment
Click on a segment number in the field and click on
the “Edit Aux” button.
• Enter values for all Auxiliary Outputs in the
appropriate fields.