User`s guide

Setpoint Programming
Setpoint Profile Configuration
Release E UMC800 Control Builder Users Guide 159
1/01
Properties display tab
On this tab, the information that you will configure relates to:
Setting upper and lower limits for the SP Trend display.
It looks like this graphically on the Control Builder. Table 38 describes the parameters and the entry
information for each parameter.
Table 38 Display properties
Parameter Parameter Description Entry Information
Display High Limit
This is the upper limit for the SP Trend display.
Allow for the maximum
and minimum profile
and PV values.
Display Low Limit
This is the lower limit for the SP Trend display. Allow for the maximum
and minimum profile
and PV values.