User`s guide

Setpoint Programming
Setpoint Profile Configuration
154 UMC800 Control Builder User’s Guide Release E
1/01
Properties text tab
On this tab, the information that you will configure relates to:
• giving the SP program a name,
• selecting an Engineering Units Descriptor for the program,
• describing the Aux. Out (name),
• selecting an Engineering Units Descriptor for the auxiliary output.
It looks like this graphically on the Control Builder. Table 34 describes the parameters and the entry
information for each parameter. Enter the information in the appropriate fields.
Table 34 Text properties
Parameter Parameter Description Entry Information
Label
Program Name Up to 8 characters
Engineering Units
Engineering Units Descriptor Up to 4 characters
Aux. Out Description
Auxiliary Output Descriptor Up to 8 characters
Aux. Out EU Label
Auxiliary Output Engineering Units Descriptor Up to 4 characters