User`s guide

Control Strategy Configuration
How to Download a Control Strategy
Release E UMC800 Control Builder User’s Guide 143
1/01
Step Action Result/Graphic
4 Click “OK”.
The “Status” will change to “current action” and
will show a “Percentage Complete” in that field.
When the download is complete, the Control
Builder will attempt to put the controller into ‘RUN”
mode. If it succeeds, the “Status” will show
“Controller is successfully Downloaded and
Running”. If the mode toggle switch on the
controller is in the PROGRAM position, a message
box will open and the “Status” will show
“Download Complete”.
5
Click “Close”. The file has been downloaded.
6
If there is a problem with the download, a failure
message will appear.
• Check your communication Set Up for correct
settings.
NOTE: If the Control Builder uploads or
downloads while the Operator Interface is doing
one or the other, the following error message will
appear:
BAD SEQUENCE NUMBER