User`s guide

Control Strategy Configuration

How to Download a Control Strategy

Release E UMC800 Control Builder User’s Guide 141

1/01

How to Download a Control Strategy

Introduction

Once a Control Strategy is stored on the computers Hard Drive, the configuration data can then be called up

and downloaded to the controller.

Downloading a control strategy

REFERENCE

Configuration data can also be downloaded from the operator interface. Refer to the UMC800

Operator Interface User Guide, Document 51-52-25-62, for procedures.

ATTENTION

The controller does not need to be in PROGRAM mode to download a control strategy. The

Control Builder will do this automatically (with permission) at the time of download.

Step Action Result/Graphic

The Download will use the file shown in the active

view window. If necessary:

• From the “FILE” menu, select “OPEN”. The

“OPEN” dialog box will appear.

• Select the File (.FBD) that is to be downloaded.

• Click “OPEN”. The selected Function Block

Diagram will appear in the Active View window.

(Only the active document window can be

downloaded.)