User`s guide

Control Strategy Configuration
How to Save a Function Block Diagram
140 UMC800 Control Builder User’s Guide Release E
1/01
How to Save a Function Block Diagram
Introduction
One of the last stages of configuration is to save the entered configuration data. This includes Function
Block configuration, Setpoint Program configuration (Setpoint Programming section), and Recipe
configuration (Setpoint Scheduler section).
Saving the configuration data
Follow the procedure below to save the Function Block Diagram.
Step Action
1
Select “SAVE” from the “FILE” menu.
First time “SAVE” will invoke the standard “Save As” dialog box.
Choose a file name and use file extension (.FBD), then click “OK”.
2
If there is no ASYS function block assigned
to the diagram, the “Controller System
Parameters” dialog box will appear.
• Select 50 or 60 HZ, then click “OK”.
3 If there are no unconnected inputs that need
to be set to OFF or 0, the data is saved
automatically.
If there are unconnected inputs that have not
been previously set to OFF or 0, The Control
Builder will notify you that there are
unconnected inputs and ask if you want to
see a list of unconnected inputs. Click “Yes”
to view the error list
Click “Log Errors” if you want to save the list
to a text file.