User`s guide

Control Strategy Configuration
How to Initiate a Configuration Print Out
Release E UMC800 Control Builder User’s Guide 137
1/01
How to Initiate a Configuration Print Out
Introduction
You can initiate printouts of the configuration data for your hard copy records. The Control Builder lets
you select the following information to be printed:
• Block Diagram (Figure 42)
• Block Parameters (Figure 43)
• Tag Properties (Figure 44)
Initiating a print out
Step Action
1
Pull down the “File” menu and select “Print”. The “Print What” dialog box will appear.
2
Click on the radio button for the type of print out you want.
See the examples in Figure 42, Figure 43, and Figure 44 for each type.
3
Click “OK”. This will launch the common Windows “Print” dialog box for printing.