User`s guide
Control Strategy Configuration
O/I Security Settings
Release E UMC800 Control Builder User’s Guide 133
1/01
Set security details
Table 30 lists all the features that appear on the “Operator Interface Settings" dialog box with a description
of the security detail when the feature is selected.
Table 30 Set security details
Feature Description
This is a master enabling switch. Click on box to enable security on
any of the engineer or operator secured items that are also selected.
If this is not selected, no engineer or operator secured items will be
secured, even if they are selected.
Enter a 3-digit NUMERIC code which will be used to secure items 3
through 8. 0 disables Operator Security.
Click to secure access to setup items. Click off to allow unrestricted
access. See Table 31 for affected items.
Click to secure loop mode AUTO/MANUAL operation Click off to allow
unrestricted access. See Table 31 for affected items.
Click to secure changing between Local and Remote Setpoints. Click
off to allow unrestricted access. See Table 31 for affected items.
Click to secure access to disk utilities, data storage controls, and load
data storage settings. Click off to allow unrestricted access. See Table
31 for affected items.
Click to secure setpoint program operation. Click off to allow
unrestricted access. See Table 31 for affected items.
Click to secure recipe and variable operation. Click off to allow
unrestricted access. See Table 31 for affected items
Click to secure Log On/Off operation. Click off to allow unrestricted
access.
This is a higher level of security than the operator security code
because it secures access to “off-line” functions such as calibration.
Choose a 3-digit code which will be used to secure the item 10.
0 disables Engineering Security
Click to secure the displays and menu items in Table 31 under SET
UNIT. Click off to allow unrestricted access.
Click to secure Edit Device Control and HOA EDIT displays. Click off
to allow unrestricted access.
Click to secure Edit Device Control and HOA operate display Edit
menus. Click off to allow unrestricted access