User`s guide

Control Strategy Configuration
O/I Security Settings
132 UMC800 Control Builder User’s Guide Release E
1/01
O/I Security Settings
Introduction
The Control Builder lets you configure, download, and upload security settings for the operator interface.
The security configuration is divided into two areas: Operator Security and Engineer Security.
Configuring security
Follow the procedure in Figure 40 to configure the “OI Security Settings”.
3. Click on a box to
activate a selected
security level.
1. Select
“OI Settings”.from
the “Configure” menu.
2. Click here to
enable the security
settings selected.
4. Set each
security code.
From 0 to 999
The “Operator
Interface Settings”
dialog box will
appear.
Each of the security features shown in the dialog
box offers a different level of security.
Figure 40 Configuring security
Table 31 lists the displays and functions that are secured for each security level.