User`s guide

Control Strategy Configuration
O/I Display Buttons (1-8) Configuration
Release E UMC800 Control Builder User’s Guide 127
1/01
Configuration procedure
Follow the procedure in Figure 38 to configure the “Display Buttons”. For examples of display format
types, refer to Table 29.
2
. Select a display format type.
The format selected will determine
what will be shown in the "Group/Tags" field
below the Display Format Selection box.
3
. A list of configured groups/tags
and their titles will appear in the
"Group/Tags" selection window
on the tab card. (See
Note 1
)
NOTE 2
: To
ADD
- click on a group/tag number from the " Gr/Tag" list and
click "ADD". The selection will be added to the "Selected Display Formats”
list in the next available Screen location # (1 to 10). The "Selected Screen Formats" list identifies:
- the position (#) of the display screen (from 1 to 10)
- The display format selected for that position
- the group/tag selected for display
4
.
To
ADD
a Group/Tag
See
Note 2
.
To
INSERT
a Group/Tag
See
Note 3
.
NOTE 3
: To
INSERT
- Click on a page in the "Group Page" list and then
select a screen position (# in the first column) from the "Selected Screen Formats" list.
That Page will be inserted into the screen position that was selected and indicate the format selected.
Other entries will shift down as required.
5
. To
DELETE
a page,
click on position (#) in the
"Selected Display Formats"
list and click on the
"Delete" button
6
. Select the next BUTTON
tab at the top of the page to
configure another button and
repeat the procedure
1
. Select a BUTTON tab at
the top of the page
NOTE 1
: The MULTI-LOOP FACEPLATE and MULTI-PROG OPERATE selections give you several format
choices based on the TAG ORDER that was set up during configuration.
Figure 38 Configuring display buttons