User`s guide

Control Strategy Configuration
O/I Display Buttons (1-8) Configuration
126 UMC800 Control Builder User’s Guide Release E
1/01
O/I Display Buttons (1-8) Configuration
Description
This function lets you customize display access by assigning specific display screens to the operator
interface keyboard keys (1-8). Each of the eight screen-access buttons on the operator interface supports a
sequence of up to ten screens. Screens assigned to these buttons may be Monitor screens (view data only)
or Operate screens (take actions). The type of screen and the data presented on the screen is defined during
configuration.
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
1 2
3 4
5 6
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
Screen 1
Screen 2
Screen 10
7 8
Each screen display format is selected from a list of available formats and applied to a display group that
has been set up for any of the display configuration selections in the “Configure” menu, “Display Tag
Groups”. You can also assign “Message Displays” on the “Configure” menu to a Display Screen Button.
NOTE: Not all models have 8 Operator Interface keyboard keys.
Accessing the display button configuration tabs
Follow the procedure in Figure 37 to access the “Display Button Configuration” dialog box.
Select a Button Tab
for Configuration.
Select “OI Display
Buttons” from the
“Configure” menu.
The “Display Button
Configuration” dialog
box will appear.
There are 8 button tabs at the top of the dialog box.
Each tab represents one Screen Button Display ‘set
up’ starting with Display Button #1 as noted in the
box at the top of the dialog box.
Figure 37 Accessing the display button configuration tabs