User`s guide

Control Strategy Configuration
Setpoint Scheduler Display Configuration
Release E UMC800 Control Builder User’s Guide 121
1/01
Auxiliary output label configuration
The “Auxiliary Output Labels” lets you set up labels for Auxiliary Outputs in the Setpoint Schedule to be
displayed on the Operator Interface.
Figure 33 shows you the “Auxiliary Output Label” dialog box and entry fields and an example of a
Setpoint Schedule View Aux. Display.
STATE SEG RECYCLES REMAIN
RUN # 2 100
SEG REM 0000:00:00 TOTL 0000:00:00
LABEL123 SCHED 10 SPTAG1
11:30
F1
RUN
F2
HOLD
F3
RESET
F4
ADV
SP PV
AX1 AXLABEL1 1234567.8 1234567.8 ENGU
AX2 AXLABEL2 1234567.8 1234567.8 ENGU
AX3 AXLABEL3 1234567.8 1234567.8 ENGU
AX4 AXLABEL4 1234567.8 1234567.8 ENGU
AX5 AXLABEL5 1234567.8 1234567.8 ENGU
AX6 AXLABEL6 1234567.8 1234567.8 ENGU
AX7 AXLABEL7 1234567.8 1234567.8 ENGU
AX8 AXLABEL8 1234567.8 1234567.8 ENGU
LOAD
MORE COMMANDS
Enter
Label
title.
Enter Engineering
Units for the Aux
setpoint.
Enter
Decimal
Places.
Figure 33 Auxiliary output label dialog box and screen example