User`s guide

Control Strategy Configuration
Setpoint Scheduler Display Configuration
120 UMC800 Control Builder User’s Guide Release E
1/01
Main output label configuration
The “Main Output Labels” lets you set up labels for Main Outputs in the Setpoint Schedule to be displayed
on the Operator Interface.
Figure 32 shows you the “Main Output Label” dialog box and entry fields and an example of a Setpoint
Schedule Operate Display.
STATE SEG RECYCLES REMAIN
RUN # 2 100
SEG REM 0000:00:00 TOTL 0000:00:00
LABEL123 SCHED 10 SPTAG1
11:30
F1
RUN
F2
HOLD
F3
RESET
F4
ADV
SP PV
SP1 SPLABEL1 1234567.8 1234567.8 ENGU
SP2 SPLABEL2 1234567.8 1234567.8 ENGU
SP3 SPLABEL3 1234567.8 1234567.8 ENGU
SP4 SPLABEL4 1234567.8 1234567.8 ENGU
SP5 SPLABEL5 1234567.8 1234567.8 ENGU
SP6 SPLABEL6 1234567.8 1234567.8 ENGU
SP7 SPLABEL7 1234567.8 1234567.8 ENGU
SP8 SPLABEL8 1234567.8 1234567.8 ENGU
LOAD
MORE COMMANDS
Enter
Label
title.
Enter Engineering
Units for the setpoint.
Enter
Decimal
Places.
Figure 32 Main output label dialog box and screen example