User`s guide

Control Strategy Configuration
Setpoint Scheduler Display Configuration
Release E UMC800 Control Builder User’s Guide 119
1/01
Setpoint Scheduler Display Configuration
Description
An operator can interact with the configured Setpoint Schedules through the Setpoint Program Operate
display at the operator interface.
Eight character labels and four character engineering units are provided for each process variable of the
master and auxiliary setpoint blocks. Labels and on/off descriptions are also provided for the Digital Event
block. Assigning these labels first will aid you in the schedule configuration process. These labels will
appear in the configuration dialog boxes.
Accessing the setpoint scheduler display configuration tabs
Follow the procedure in Figure 31 to access and arrange the “Setpoint Scheduler Display” configuration
dialog box.
Select a tab for configuring the
Setpoint Scheduler Displays.
Select “Setpoint Scheduler Display”
from the “Configure” menu.
There are 3 tabs at the top of the dialog box. Each
tab represents setpoint scheduler display label ‘set
up’ starting with the Main Output Labels.
The “Setpoint
Scheduler Display
Configuration” dialog
box will appear.
Figure 31 Configuring the setpoint scheduler display